Intelligent Stagnation Flush - WimTec OCEAN W7 Montage- Und Bedienungsanleitung

EN
OCEAN W7
Description of the functions

Intelligent stagnation flush:

DIP switch 4
Serves to rinse water supply lines in order to remove stagnant water that accumulates during
longer periods of non-usage.
DIP switch 4 "ON" =
DIP switch 4 "OFF"=
3–48 h
10 s | 20 s
WimTec OCEAN W7
38 Wall fitting
Intelligent stagnation flush activated.
Intelligent stagnation flush deactivated (preset).
Time interval
Specifies the time between the stagnation
flushes. Adjustable from 3 to 48 h at the interval
control (see Page 27).
Smart automatic flush
If the fitting has not been used for the
set period, stagnation flushing is trig-
gered for the duration configured (see
Dip 5, see Page 39).
i
ATTENTION!
If you are in the detection range or if the cleaning stop function
is enabled, the intelligent stagnation flush will only start 2 min
after you leave the range or once the cleaning stop function is
disabled.
5 s before and after the stagnation flush, this is signalled by the
AquaCap sensor button flashing quickly.
ON
OFF
1 2 3 4 5 6