OCEAN W7
Operation
Stopping
Auto stop (DIP switch 2 = "ON"):
Manual stop (DIP switch 2 = "OFF"):
Safety flow arrest (flush time control, see Page 27):
If auto stop is activated, the water flow is automatically stopped
once the user leaves the detection range of the infrared sensor.
Tap the Aqua-Cap sensor button to stop the flow of the water.
After the configured flush time has elapsed, the water flow is
automatically stopped.
WimTec OCEAN W7
Wall fitting
EN
ON
OFF
1
2 3 4 5 6
ON
OFF
1
2 3 4 5 6
35