Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OCEAN W7
Assembly
1
4
1.
Close the main water valve.
2.
Remove the fl ush-mount protective cover.
3.
Cut off protruding parts from the fl ush-mount box so it
aligns with the tiles.
4.
Where necessary, seal off space between wall and
fl ush-mount set with silicone.
5.
Unscrew both mounting clips with a screwdriver until
they align with the tiles.
6.
Remove the spout building protection.
2
5
3
6
Perform the following steps
in the order indicated!
WimTec OCEAN W7
Wall fi tting
EN
!
ATTENTION!
29
Werbung
Kapitel
Inhaltsverzeichnis
