WimTec OCEAN W7 Montage- Und Bedienungsanleitung Seite 33

OCEAN W7
Bringing the front plate to a level position
A
D
A
Open the Allen screw at the bottom of the chrome
spout and remove the spout. Next, carefully remove
the front plate using a screwdriver (click-lock system).
B Unscrew the mounting clip using a screwdriver.
C Flip the mounting clip 180°.
D
Feed the screw into the rear opening.
E The mounting clip's nose points downwards – adjust
1 mm downwards – fasten the mounting clip again
until it aligns with the tiles.
F The mounting clip's nose points upwards – adjust
1 mm upwards – fasten the mounting clip again until
it aligns with the tiles.
B
E
C
F
!
Mounting clip:
into any direction and then
inserted into the guide rail.
Nose points
downwards
Nose points
downwards
WimTec OCEAN W7
Wall fitting
EN
Can be turned
Nose in
centre position
Nose in
centre position
33