Operation; Switch On - WimTec OCEAN W7 Montage- Und Bedienungsanleitung

EN
OCEAN W7

Operation

Switch on

Automatic activation (DIP switch 1 = "ON"):
Manual activation (DIP switch 1 = "OFF"):
WimTec OCEAN W7
34 Wall fitting
As soon as the infrared sensor detects the user, the water
flow is started without any contact. The sensor can be
adjusted in the range from 5 - 45 cm.
i
ATTENTION!
The switch off range is automatically measured - no adjust-
ment required!
1. When you step in front of the fitting, the light symbol
pulses to indicate user detection.
2.
Tap the Aqua-Cap sensor button to start the flow of the water.
ON
OFF
1 2 3 4 5 6
ON
OFF
1 2 3 4 5 6