Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
OCEAN W7
Assembly
19
> Click <
22
!
ATTENTION!
Perform the following
steps in the order indi-
cated!
WimTec OCEAN W7
32
Wall fi tting
9 20
Page 33
23
19.
Put the glass front plate into place by carefully pushing in
inwards (click-lock system).
20.
Check whether the front plate is level. If not, correct the
alignment as described on Page 33.
21.
Place the spacer ring over the spout pipe towards the front
plate and grease the O-ring on the spout pipe.
22.
Place the chrome spout over the outlet pipe and arrest it at
the bottom using the Allen screw (size 3 Allen key).
23.
Open the main water valve and switch on the power supply
(causing the safety locking mechanism of the magnetic valve
to activate).
24.
Perform a system test.
21
24
Werbung
Kapitel
Inhaltsverzeichnis
