WimTec OCEAN W7 Montage- Und Bedienungsanleitung Seite 37

OCEAN W7
Description of the functions
Cleaning stop and Continuous flow:
DIP switch 3
Enable continuous flow:
Disable continuous flow:
By tapping the AquaCap sensor button for approx. 3 s, the illu-
minating icon is dimmed and the continuous flow is activated
for the flushing stop time configured on the flush time control
(see Page 27).
Automatic:
After the flushing stop time configured on the flush time
control has elapsed (see Page 27).
Manual:
By tapping the AquaCap sensor button again, continuous
flow is stopped immediately.
WimTec OCEAN W7
Wall fitting
EN
ON
OFF
1 2 3 4 5 6
37