Part 3: Functions; Operations - involight SlimPAR766 Bedienungsanleitung

Part 3: Functions:

3.1 Operations:

2.DMX-OUT
3.DMX-IN
Pic.1 Backside
1. POWER IN: IEC mains power input socket with fuse holder for F3A 250V fuse. Connection via the
supplied IEC mains cable.
2. POWER OUT: IEC Power Outlet Jack
3. DMX input: 3-pin, male XLR socket for connecting a DMX control unit (for example a DMX mixing
console).
4. DMX output: 3-pin female XLR socket for forwarding the DMX control signal.
5. LED-DISPLAY - Displays the operating mode and the value of individual functions
The assignment of the connection leads is as follows:
Line
Brown Outer conductor
Blue Neutral conductor
Yellow/Green
The protective conductor must be connected!
The device has 4 operating modes (static colours, automatic program sequences, music-controlled program
sequences and DMX). You can set and influence the various operating modes via the on-board menu. In DMX
mode, the functions are controlled on 8, 4-1, 4, 3 or 2 channels. Optionally, an IR remote control is available. The
functions that can be called up can be found in the instructions for the remote control.
Pin International
Protector
5. LED-Display
2.POWER-OUT
1.POWER-IN
L
N
20