involight SlimPAR766 Bedienungsanleitung Seite 23

AUTOMATIC CONTROL:
"Menu"
Press the
"Enter"
program. Press
"Down"
buttons, you can now set the desired automatic program.
MUSIC CONTROL:
"Menu"
Press until
select sound program
the desired sound program
PROCEDURE OF THE PROGRAM:
"Menu"
Press the
"Enter"
again to select the speed
now set the desired speed of the program.
MICROPHONE SENSIVITY:
The sensitivity with which the headlamp reacts to the music signals (bass impulses).Press the
until the display shows
select the microphone sensitivity
can now set the desired microphone sensitivity. The height is the value, the more sensitive the microphone reacts
to the music signals (bass impulses) in the environment.
SILENT-MODE:
The Silent mode refers to the music-controlled operation and is also known as Intelligent Sound Control. If the
silent mode is activated
impulses), the light beams of the device switch off (BLACKOUT). If the silent mode is deactivated
current program of the device will continue slowly, even if no further music signals (bass impulses) are received.
"Menu"
Press until
"Enter"
Press
can now activate the silent mode
IRC-CONTROLLING:
"Menu"
Press the
"Enter"
again to select
activate the IR remote control
DMX-MODE:
To select the DMX mode and set the start address, press
"Enter"
appears. Press
select DMX start address
now set the desired start address.
MASTER/SLAVE-OPERATION:
The "SlimPAR644" can be linked to other devices. To set a device as a
button until the display shows
the master device. The interconnected devices are now working synchronously.
button repeatedly until the display shows
again to select
"Sound"
is displayed. Sound mode is activated. Press
"SO-1" "SO-2".
to
"SPED"
button until
"SP-1"
"Sens".
The microphone sensitivity menu is displayed. Press
"SE-1"
"ON"
and the microphone of the device does not receive any music signals (bass
"SILE"
is displayed. The menu for silent mode is displayed.
"ON"
again to select
"ON"
or deactivate
key until the display shows
"ON" "OFF".
or
"ON"
or deactivate
again to select
"d1" "d512".
to
„ Slav"
. Confirm with the
"Auto".
"AU-1"
to
"Up"
With the
appears on the display. The flow rate menu is displayed. Press
"SP-9"
to
"SE-9".
to With the
"OFF".
or With the
"OFF".
"INFR".
The IR remote control menu is displayed. Press
"Up"
With the
"OFF".
"Menu"
"4CH" "8CH"
or
"Up"
With the
„ Enter"
22
Now the unit plays the automatic
"AU-2"
. With the
"Enter"
"Down"
and buttons you can now set
. With the "Up" and "Down" buttons you can
"Enter"
"Up" "Down"
and
"Up" "Down"
and
"Down"
and
button until the
"Setup"
mode. Press
"Down"
and
„ Slave"
, press the
key. Select the desired program on
"Up"
and
again to
"Menu"
button
again to
buttons, you
"OFF"
, the
buttons you
buttons you can now
"ADDR"
display
again to
buttons, you can
„ Menu"