Troubleshooting - SCOPREGA GE 20-2 Bedienungsanleitung

PROBLEM
Unit will not Start
Will not inflate
ACCESSORIES
Recommended accessories for use with your inflator are available from your local dealer or
authorized service center
WARNING
The use of any accessory not recommended for use with this inflator could be hazardous.

TROUBLESHOOTING

POSSIBLE CAUSE
Battery LOW
ON push button not ON
The safety fuse is blown
Unit is damaged
Wrong port connected
Wrong setting on the pressure knob
Battery LOW with YELLOW light ON
Battery LOW with RED light ON
POSSIBLE SOLUTION
Recharge the battery by the 110-240Vac
battery charger or connect the unit to an external
battery via alligator clips.
Push the button to ON.
Replace the fuse with one of the same size (30 A).
Contact SCOPREGA Service Center.
Connect the air hose to the proper port.
Adjust settings.
Connect the unit to an external battery via alligator
clips or recharge the unit via the vehicle plug.
Connect the unit to an external battery via alligator clips.