Control Of The Septic System - Kessel INNO-CLEAN+ Anleitung Für Einbau, Bedienung Und Wartung

8. Control unit operation
Menu navigation
The control unit's menu navigation is subdivided into the
system information as well as three different main menu
items. The background lighting is activated if one of the
control keys is pressed once.
OK-key:
Skip to the next higher level
ESC-key: Skip to the next lower level
: Navigation innerhalb einer Ebene
L
M
Alarmkey: The acoustic signal can be acknowledged
by pressing this key once.
If the fault has been eliminated, the visual
fault can also be acknowledged by pressing
the key once more. If the fault has not been
eliminated, the acoustic alarm is triggered
once more when the alarm key is pressed
again.
In case of a mains power failure, the plant is not ready for
operation. The control unit switches to stand-by mode
(battery operation). This becomes noticeable by means of

8. Control of the septic system

Display/indicator panel
Movement keys / direction keys
Enter key/OK key
Back key/ESC key
Pilot lamp indicating readiness for operation
Pilot lamp for malfunction message
Mains power supply cable
Mains connection for compressor
Connection compressed air sensor
Connection options
for external signal generator
Connection for valve block
Connecting socket for floating contact
an acoustic and visual alarm. The acoustic alarm can be
acknowledged by pressing the alarm key. Stand-by mode
is maintained for at least 72 hours. Afterwards, the control
unit switches off automatically. If the mains connection is
re-established within one hour, the program will automa-
tically continue with the last program phase. If that is not
the case, the device re-initialises itself when the mains
connection returns. This can also be carried out manual-
ly by prolonged pressing of the alarm key.
Note:
Certain menus are password-protected. This serves to
protect the plant against inappropriate use.
116