Safety Instructions For Colour Application Devices - WAGNER WallPerfect W 985 E Originalbetriebsanleitung

GB

Safety instructions for colour application devices

•
Caution!
Wear breathing equipment: Paint mist and solvent vapors are damaging to
health. Always wear breathing equipment and only work in well ventilated rooms or
using supplementary ventilating equipment. It is advisable to wear working clothing,
safty glasses, ear protection and gloves.
CAUTION: DANGER OF INJURy!
Never point the spray lance at people or animals.
Sockets and plugs must be masked. Risk of an electric shock as a
consequence of sprayed material entering the socket!
•
Only materials with a flash point of 21 °C (32° in UK) or higher may be used with this
device (See information on the material tin. Hazard class A II and A III permitted).
•
Flammable agents may not be used for spraying with this device.
•
The device may not be cleaned using flammable solvents with a flash point below
21°C.
•
Caution against dangers that can arise from the sprayed substance and observe the
text and information on the containers or the specifications given by the substance
manufacturer.
•
Do not spray any liquid of unknown hazard potential.
•
The device may not be used in establishments that are subject to explosion
prevention regulations.
•
In order to avoid risk of an explosion during spray operations, excellent natural or
artificial ventilation must be provided.
•
While spraying there may be no ignition source in the surrounding area, for example,
open fire, cigarette smoke, sparks, red-hot wires and hot surfaces.
•
Ensure that no solvent vapors are sucked in by the unit. Do not spray onto the unit!
•
The device is not a toy. For this reason do not allow children to handle or play with the
device.
•
Before working on the device, remove the power plug from the socket.
•
Mask all areas that are not going to be sprayed. When working keep in mind that
wind, for example, may transport paint mist over great distances and cause damage.
•
Always switch off the device before placing the spray lance in the holder.
•
The turbine is fitted with a thermal fuse, which switches off the turbine in the event of
overheating. In this case, turn off the device, remove the plug and let the device cool
down for at least 1/2 hour. Eliminate the cause of heating, e.g. bent hose, soiled air filter,
slots for air intake covered.
With original WAGNER accessories and spare parts, you have the guarantee that all
safety regulations are fulfilled.
18
WallPerfect W 985 E