Renkforce GX111 Kurzanleitung Seite 34

Only these phone numbers will receive an alarm text message.
The phone numbers must be entered in international format. The phone number
0172xxxxx therefore turns into +49172xxxxx.
These phone numbers are also required for the function INCALL (if activa-
ted).
Which sensors are to trigger an alarm and what is deemed an alarm?
SET SHOCK 10 #1513
10 = maximum sensitivity (slight tapping), 1 = insensitive
SET SHOCK 8 3 #1513
A shock of level 8 must continue for at least 3 seconds.
SET SHOCK 5 10 INV #1513
A shock of level 5 must be gone for 10 seconds.
SET LIGHT #1513
The sensor measures the current light strength and adjusts it to just AVOID the alarm.
SET LIGHT 10 #1513
10 = maximum sensitivity (slight light irradiation), 1 = insensitive (direct solar irradia-
tion)
SET SLOPE 45 #1513
Angle indication in degrees (here in the example: 45°), when receiving the text message,
the current position is stored as the zero position.
The measurement takes place along the housing edges; each axis (housing edge) is
measured separately.
The alarm is triggered once the housing is turned across one axis beyond the set
angle.
The indication in „TEST STATUS #1513" of the angle (axis/housing edge) is the one with
the highest value.
34