Disposal; Ce Conformity; Legal Information - FIOR & GENTZ NEURO TRONIC Produktbeilage

Article Number for System Width
Item 16mm
16 SK0383-5
17 SK0385-03
18 SK0385-00
* Sliding Washers
Ø = 19mm
GS1910-040
GS1910-045
GS1910-050
GS1910-055
GS1910-060

15. Disposal

Dispose of the system joint and its individual parts properly. The product must not be dis-
posed of with the residual waste (fig. 36). Please comply with the applicable national laws
and local regulations for the proper recycling of recyclable materials.
For proper disposal, it is necessary to demount the system joint from the orthosis.

16. CE conformity

We declare that our medical devices as well as our accessories for medical devices are in conformity with the
requirements of the Medical Devices Directive 93/42/EEC. Therefore, the FIOR & GENTZ products bear the CE
marking.

17. Legal Information

With the purchase of this product, our General Terms and Conditions of Business Transactions, Sales, Delivery
and Payment will apply. The warranty expires, for example, if the product is mounted several times. Please
note that the product is not supposed to be combined with other components or materials than with those
recommended by the FIOR & GENTZ Orthosis Configurator. Should the product be combined with products
from other manufacturers, a written consent by the seller is required.
The information in this manual is valid at the date of printing. The contained product information serves as a
guideline. Subject to technical modifications.
Printed version from 2019-08
20mm
SK0383-5
SK0385-03
SK0385-00
Article Number for System Width
16mm
Description
solenoid fixation
washer for plunger
solenoid without plunger, with connector
20mm
Ø = 24mm
GS2411-040
GS2411-045
GS2411-050
GS2411-055
GS2411-060
fig. 36
39