Safety Notes; Technical Data - HANSGROHE Croma 100 Vario/Unica'C Set Montageanleitung

Safety Notes

Gloves should be worn during installation to prevent
crushing and cutting injuries.
Children as well as adults with physical, mental and/or
sensoric impairments must not use this shower system
without proper supervision. Persons under the influence
of alcohol or drugs are prohibited from using this
shower system.
The shower system may only be used for bathing,
hygienic and body cleansing purposes.
Do not allow the streams of the shower touch sensitive
body parts (such as your eyes). An adequate distance
must be kept between the shower and you.
The product may not be used as a holding handle. A
separate handle must be installed.
Installation example (see page 39)
Assembly (see page 40)
Important! The fitting must be installed, flushed and
tested after the valid norms.
Important! Do not use silicone containing acetic acid!
Where the contractor mounts the product, he should
ensure that the entire area of the wall to which the
mounting plate is to be fitted, is flat (no projecting joints
or tiles sticking out), that the structure of the wall is
suitable for the installation of the product and has no
weak points. The enclosed screws and dowels are only
suitable for concrete. For another wall constructions the
manufacturer's indications of the dowel manufacturer
have to be taken into account.
1
English
The filter insert (A) must be used to ensure the standard
flow rate and to protect the hand shower against
incoming dirt by pipework. Do you want a larger water
flow rate, then you must use the filter packing (B) instead
of the filter insert (A). Incoming dirt leads to defects
or/and can damage parts of the hand shower; such
caused faults voids all liability and guarantee claims.
(see page 41)
Optimal functioning is only guaranteed with the
combination of Hansgrohe hand showers and
Hansgrohe shower hoses. Shower hoses are only
suitable for a connection from the shower to the fitting.
Never fit a shut-off device between the fitting and the
hose.

Technical Data

Operating pressure:
Recommended operating pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Spare parts (see page 8/9)
Operation (see page 42)
Cleaning (see page 43)
max. 0,6 MPa
0,1 - 0,4 MPa
max.60 °C