Revital R-SR-1309 Installationsanleitung Seite 41

– Connect all plugs (see Drawing 9-4).
Refer to the labels on the plugs
to make sure they are correctly connected.
– Connect the cold-water and hot-water pipes to the pipes in the wall (see Drawing 9-5).
Drawing 9-4
Connect the 230V power cable to the mains grid in the wall.
–
Always connect the water pipes
parallel to the wall, not at right angles.
Note! In some countries, electricity and water
connections have to be realised by a recognised engineer.
2-15 Installation
R-SR-1309 & R-SR-1310
Drawing 9-5
2
10-04-2017