Revital R-SR-1309 Installationsanleitung Seite 40

2
R-SR-1309 & R-SR-1310
9. Prepare the electricity and water supplies.
Place the hand shower onto the holder (see Drawing 9-1).
–
Drawing 9-1
– Connect the hand shower to the
connection on the rear panel (see Drawing 9-2).
– Connect the hose for the water supply to the connector; and subsequently connect
the hose to the connection of the overhead shower (see Drawings 9-2 and 9-3).
Silicone
sealing ring
Drawing 9-2
Place a rubber sealing ring in the couplings.
10-04-2017
Silicone
sealing ring
Silicone
sealing ring
Silicone
sealing ring
Drawing 9-3
Installation 2-14