Battery Tester C.A 6630
OPERATING AND SAFETY INSTRUCTIONS
Observe the recommended operating conditions: temperature, humidity,
•
altitude, degree of pollution, etc.
Use only accessories supplied with the instrument and compliant with the
•
safety standards in force.
Use only batteries of the recommended type and rating to power the
•
instrument, failure to do so may damage the instrument and render the
warranty void.
Switch the instrument off when not in use.
•
Before opening the instrument, check that all the terminals are
•
disconnected and that the instrument is switched off.
All repairs and metrological checks must be carried out by only qualified
•
approved personnel.
Do not measure DC voltages greater than 50V, failure to do so may
•
damage the instrument and render the warranty void.
Do not measure AC voltages, failure to do so may damage the instrument
•
and render the warranty void.
After carrying out measurements on a high-voltage battery and before
•
carrying out further measurements, short-circuit the measurement cords to
eliminate any DC capacitive charge, liable to damage a low-voltage
battery.
22
English