Maintenance - FLUX F 414 Originalanhang

6

Maintenance

Danger from splashing liquids!
Before removing the motor:
•
•
•
Danger of electric shock!
•
Note
•
•
•
6.1 Replacing power cable
Attention!
Always replace defective mains connection cables.
Changes to the mains connection cable may only be carried out by qualified
electricians.
When replacing power cables, use at least the following types:
F 414
8 / 11
Empty pump, hose and fittings.
Do not remove the motor as long as there is still back-pressure within
the system.
With pressurised containers, the motor must only be taken off when the
container is depressurised.
Dirt, high humidity or material damage to the motor casing may lead to
dangerous electric shocks.
Damaged parts must be replaced with new ones.
Only use genuine spare parts.
When returning the pump for repair, it must be accompanied by the
decontamination certificate (download at www.flux-pumpen.de).
Motor Type
H 07 RN-F 5G 1.5
Attachment Three-Phase Gearmotor F 414
Supply voltage
230 V - 400 V