Inhaltsverzeichnis
Werbung
VENT DEVICE INSTALLATION
The vent device mod. 969-9831 allows to avoid
undesired pump aeration of the pump during a
temporary power failure (adjustable time up to 36
min.), and enables an automatic vent operation.
Unscrew and remove the threaded plug.
Screw the flange mod. 969-9109 on the pump, tak-
ing care of the o-ring right position.
Assemble the seal ring and lock the vent device in
position using the KF klamp.
VIBRATION ISOLATOR INSTALLATION
Vibration isolators for both ISO and CF version
pumps are available as accessories. They can re-
duce the vibration transmitted from the Turbo-V
250 pump to the system. Please refer to the rele-
vant instruction manual.
34
TECHNICAL INFORMATION
87-900-851-01(A)
Werbung
Inhaltsverzeichnis
