Abbildung 89. Removing the optional IDSDM/vFlash module
ANMERKUNG:
There are two dip switches on the IDSDM/vFlash module for write-protection.
Nächste Schritte
1.
Install the optional IDSDM/vFlash card.
Installing optional IDSDM or vFlash module
Voraussetzungen
Follow the safety guidelines listed in Sicherheitshinweise.
Schritte
1. Locate the IDSDM/vFlash connector on the system board.
To locate IDSDM/vFlash connector, see the
2. Align the IDSDM/vFlash card with the connector on the system board.
3. Push the IDSDM/vFlash module until it is firmly seated on the system board.
System board jumpers and connectors
Installieren und Entfernen von Systemkomponenten
section.
137