Inhaltsverzeichnis
Werbung
Chapter Six:
Microphone xNode
The microphone xNode has four mono inputs.
The microphone xNode provides four analog 2-channel outputs, line level. By default the outputs will be stereo au-
dio from an audio source from the network. This may be configured differently so that the 2 channel analog output
delivers two mono streams.
Rear Panel
The microphone xNode uses RJ45 style connectors and 25 pin D-sub connectors for audio I/O, providing an option
to either use patch cables or breakout cables for audio wiring to either use standard CAT5e patch cables or D-Sub
connector breakout cables for audio wiring.
The top 4 RJ-45 style ports are analog, mono inputs. The bottom 4 RJ-45 style ports are line level analog outputs.
The pinout of an RJ-45 port
PIN
FUNCTION
1
MIC +
2
MIC -
3
Not Used
4
Ground
5
Not Used
6
Not Used
7
Not Used
8
Not Used
shld
GND
Figure 6-1: Microphone xNode Rear Panel
© 2017 Telos Alliance - Rev 2.0.1
Werbung
Inhaltsverzeichnis
