Inhaltsverzeichnis
Werbung
Chapter Four:
Analog xNode
There are 4 two-channel (8 one-channel) inputs with the analog xNode. With default settings, the xNode will gener-
ate 4 Livewire stereo sources. You may also configure the inputs separately as different sources and generate up to 8
Livewire mono sources.
Rear Panel
The analog xNode uses RJ45 style connectors and 25 pin D-sub connectors for audio I/O, providing an option to
either use standard CAT5e patch cables or D-Sub breakout cables for audio wiring.
The top 4 RJ-45 style ports are line level analog inputs. The bottom 4 RJ-45 style ports are line level analog outputs.
The pinout of an RJ-45 port
PIN
FUNCTION
1
Left Channel
Input/Output +
2
Left Channel
Input/Output -
3
Right Channel
Input/Output +
4
Ground
5
Not Used
6
Right Channel
Input/Output -
7
Not Used
8
Not Used
Figure 4-1: Analog xNode Rear Panel
© 2017 Telos Alliance - Rev 2.0.1
Werbung
Inhaltsverzeichnis
