Herunterladen Inhalt Inhalt Diese Seite drucken

Telos Alliance xNode Serie Bedienungsanleitung Seite 15

Inhaltsverzeichnis

Werbung

Select the Simple Setup button to enter into a simple configuration screen for the xNode. The options avail-
able will vary based on the xNode.
Enter descriptive text in the Source Name fields which describe what devices are connected to the xNode (e.g.
CD player, Turntable, PC Out-1, Aux Input)
Enter descriptive text into the Name field under the Destination section which documents what is connected
to the xNode's outputs (e.g. Control Room Monitors, Headphone, CF Recorder, STL input)
The next step would be to define the audio that is present at the output. This is done by choosing the browse
button next the channel text box. A popup will appear with a list of sources that are present on the network.
A sample of three xNodes freshly installed into a network is shown in figure 2-2. At this point, not many
sources have been configured with valuable descriptive names. Hopefully you see the value of the good
practice in using the naming fields. Once you have configured all your xNode sources and other Livewire
devices, this browse popup will have more descriptive information which will help you locate the correct
source to assign to an output (Destination).
If you notice in figure 2-2, the three xNodes are showing a default host name which provides little assistance to
the end user. To resolve this you can select the System link under the Advanced Options to change the host name to
something more descriptive (e.g. Studio1-MICs, TOC-AES1, SATRCK-GPIO1).With a descriptive host name ap-
plied to the xNode, a listing of available audio streams will be displayed in a more descriptive manner, i.e., Host-
Mic@Studio1-MICs Guest1@Studio1-MICs CD1@Ctrl1-AES WXYZ-tune@TOC-ANA1, etc.
You're done! These steps were designed to get you up and running quickly, but if you need more details on other
configuration options, please continue to read this chapter.
For additional information on a particular xNode, look at the following chapters which are dedicated to each
model.
Figure 2-2
© 2017 Telos Alliance - Rev 2.0.1

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis