Inhaltsverzeichnis
Werbung
Mixer (Audio xNodes)
Introduced in software version 2.0 is the matrix mixer functionality. The most typical configuration of xNode would
be in the Stereo 4x4 mode. In this mode the functionality of the mixer is locked, and the viewer is not able to make
any changes. To unlock the functionality, press the "Enable Custom Mode" button found at the top right. Now the
viewer can left click a cross point and a pop-up appears for setting the cross point at 0dB (unity gain), setting with a
specific gain, or clear the cross point.
The mixer view is organized with inputs into the xNode as rows and outputs from the xNode as columns. Inputs and
outputs are composed of physical connections and network streams. In the case of an AES/EBU input on port 1 of
the AES/EBU xNode turning into the first network stream source of the xNode, the mixer will show the following
view (without the arrows, which are added for clarity).
Figure 3-13
Figure 3-14
© 2017 Telos Alliance - Rev 2.0.1
Werbung
Inhaltsverzeichnis
