Christopeit Sport ET 2000 Montage- Und Bedienungsanleitung Seite 21

Step 6:
Attach the computer (24) at handlebar support (17).
1. Push the plugs of the connecting cable (13) and pulse cables (28) pro-
jecting from the handlebar support (17) into the associated socket of
the computer (24).
2. Place the computer (24) on top of the handlebar support (17) and tight
firmly by using screw (21) and washers (37). The screws (21) you find
at backside of computer.
Step 7:
Attach the AC adapter (12).
1. Please insert the plug of adapter (12) to the DC socket (83) at end of
chain guard.
2. Please insert the plug of adapter (12) to the jack of wall power
(230V~50Hz).
Step 8:
Checks
1. Check the correct installation and function of all screwed and plug
connections. Installation is thereby complete.
2. When everything is in order, familiarise yourself with the machine at a
low resistance setting and make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe place as these may
be required for repairs or spare parts orders becoming necessary later.
21