Christopeit Sport ET 2000 Montage- Und Bedienungsanleitung Seite 20

Step 3:
Attach the seat (18) and seat post (16).
1. Insert the seat post (16) to seat post mounting tube of mainframe (1)
and secure in position with the seat post quick release (29).
2. Put the clamp of saddle bracket to the seat slide (34) and tighten the
seat firmly into your desired incline position.
3. After place the seat slide (34) with seat (18) onto the seat post (34) fix it
with washer 10//20 (20) and hand grip nut (19). You can move the seat
slide to adjust your desired position.
Step 4:
Attach the handlebar post (17) at mainframe (1).
1. Remove the pre-assembled Allen head bolt (14), washers (6), and spring
washers (24) from main frame (1).
2. Push the support cover (22) onto handlebar support (17).
3. Attach the front post (17) to the front post mounting tube of main frame (1)
and connect the plug of motor cable (11) to the socket of the connection
cable (13).
4. Insert the front post (17) to mainframe (1) and secure, using Allen head
bolts (14), spring washers (15) and washers (6).
Step 5:
Attach the handlebar (27) at handlebar support (17).
1. Guide the preassembled handlebar unit (27) through the upper part
of the handlebar post (17) and push the pulse cable (28) through the
holes at handlebar support into top position and close the bracket of
handlebar holder.
2. Attach the handlebar cover (32) at the handlebar (27).
3. Screw the handlebar (27) into desired position at the handlebar post
(17) with spacer (31), washer (30) and handlebar screw (25).
20