Troubleshooting; Guarantee, Warranty, Liability; Personnel Qualification; Spare Parts, Consumables - Storch ProCut basic Betriebsanleitung

Troubleshooting

A regular and careful cleaning and maintenance schedule is required to ensure trouble-free
operation. The transformer should be disconnected from the socket during troubleshooting
measures. Remove the mains plug!
If the wire does not heat up, check the 230 V power supply. Check or replace the transformer fuse
(art. no. 57 00 04). If this does not resolve the malfunction, contact the STORCH service department or
one of the STORCH service centres in your area. Do not attempt to repair the transformer yourself and do
not
replace it with a type not approved by STORCH. Other malfunctions that require the device to be repaired
may only be performed by qualified STORCH personnel or one of the authorised STORCH service centres.

Guarantee, warranty, liability

We guarantee the flawless operation of the device under the condition that it is duly operated and
maintained. The warranty expires 1 year after the date of purchase (billing date). It is restricted to material
and manufacturing defects. Additional claims and replacement of wear and tear parts (e.g. cutting wire,
fuses) are excluded. Any variations from the intended use will result in expiration of the warranty.
The device must be deployed and operated in accordance with the conditions specified in this manual. We
shall not assume any liability or warranty for damages resulting from non-compliance or improper handling.

Personnel qualification

The device should only be assembled, commissioned, operated, maintained and cleaned by those persons
who are authorised, qualified and trained to do so.

Spare parts, consumables

All of the device components are available from STORCH and its distribution partners.
We recommend that you keep sufficient quantities of the original cutting wire (d=0.7 mm)
(art. no. 57 00 46) and fine wire fuses 8A (art. no. 57 00 04) in stock.
41