Settings Menu - DERMAVIT Diamond Shield IE Professional Bedienungsanleitung

Settings Menu

•
Language: Select from English or German.
The input is done with the arrow keys left and right.
•
Contrast: Adjusts the contrast of the LCD display.
The setting between 3 and 20 is done with the arrow keys left and right.
•
Const amps: enables or disables the constant current control.
The input is done with the arrow keys left and right.
If no is selected, the intensity of all the frequency programs (including
those, that are stored on the chip cards) is usually set on the voltage and
does not have a constant current control.
•
Speaker: the tone pitch of the internal audio signal.
Use the arrow keys left and right to choose 4 or 5 kHz.
•
HW Rev.: Displays the hardware version of your device.
This menu is used to configure the device. The settings
made here are retained even after switching off the device
or changing the battery.
Diamond Shield IE Professional
Instruction Manual
page 64