Individual Menu - DERMAVIT Diamond Shield IE Professional Bedienungsanleitung

Individual Menu

This menu serves as a working environment. It allows you, to define and edit up
to 20 frequency programs, in order to store them as a sequence on a Master chip-
card. The stored frequencies are conserved even when the device is switched off
or the battery is changed. The frequency programs can be executed singularly by
pressing the START-button.
You can define the frequency programs with all their parameters using this menu
or you can copy programs from a Master- or a database-chipcard and, if neces-
sary, edit them.
In copying on a Master chipcard all contained frequency programs will be included
in the sequence. So, for a new composition you have to delete unneeded pro-
grams. If you want to retain the defined programs for later compositions, you can
use a big Master chipcard quasi as your own database chipcard.
The menu Individual displays a list of all programs which
have been already defined. (Of course for a new device
this list will be blank.) The entry New freq. allows you to
define a new frequency program. see chapter Define or
change a frequency program, page 55)
By selecting a frequency program and pressing the OK-
button you will enter a submenu, which shows several op-
tions for the selected frequency program.
The following actions are available:
•
Edit: The frequency and all parameters can be edited.
See chapter Define or change a frequency program,
page 55.
•
Delete: The frequency program is deleted.
•
Move up: The frequency program is shifted one positi-
on up in the list of the menu Individual.
•
Move down: The frequency program is shifted one po-
sition down in the list of the menu Individual.
Diamond Shield IE Professional
Instruction Manual
page 54