Main Menu - DERMAVIT Diamond Shield IE Professional Bedienungsanleitung

Main Menu

The Main menu shows the following items:
•
Chipcard: This item is displayed only if a chip card is inserted. It can be
used to display and run or (for Master chipcards) to edit the content of the
chipcard (see page 59).
•
Standard: Under this menu item you can find preinstalled sequences
and frequency programs (see page 52).
•
Individual: This menu allows you to define and edit up to 20 single fre-
quency programs for storing them as a sequence on a Master chipcard.
The programs can be executed singularly from this menu (see page 54).
•
Settings: In this menu various settings (language, display contrast, con-
stant amps, speaker) can be undertaken (see page 64).
Chipcard
Sequence(s)
Programs
Shortly after switching on the device, the Main menu will
appear. Using the + and - button you can navigate to
a menu item and activate the corresponding submenu by
pressing the OK button. If you want to leave the subme-
nus, you can always return to the Main menu by pressing
the EXIT button.
Main menu
Standard
Sequence(s) defined freq.
Programs
Diamond Shield IE Professional
Instruction Manual
Individual
Edit
Delete
Move up
Move down
New freq.
name
frequen. 1
offset
... (further
parameters)
Settings
Language
Contrast
Const amps
Speaker
HW Rev.
page 51