Working With Chipcards - DERMAVIT Diamond Shield IE Professional Bedienungsanleitung

Working with chipcards

As accessory, three different types of chip cards are available:
• Predefined chipcards contain permanently stored sequences and frequen-
cy programs. These can be played but neither modified nor copied into the
individual memory.
• Master chipcards are delivered empty and can be programmed with user-
defined sequences from the individual memory.
• Database-chip cards contain predefined frequency programs, which you
can copy to the individual memory for editing and copying from there to a
Master Chip Card.
Running a chip card
Regardless of the type of chip card, their sequences and frequency programs can
be played as follows:
Insert the chipcard into the chipcard slot of the device.
Select the menu item Chip card and press the OK-button.
A submenu appears, which displays the contents of the
chipcard.
The entire sequence(s) and/or single sub-programs can be
applied similarly as it is described in the chapter Standard
menu, page 47.
For running the entire sequence of the selected program,
press the START-button.
For running single sub-programs of the sequence, enter
the submenu of the sequence by pressing the OK-button.
The subprograms of this sequence are displayed. Then
select the desired subprogram and run it by pressing the
START-button.
Diamond Shield IE Professional
Instruction Manual
page 59