Bringing Into Service - DERMAVIT Diamond Shield IE Professional Bedienungsanleitung

Bringing into service

Insert the battery
1. Open the battery compartment cover on the back of the device.
2. Insert the supplied battery. Please keep in mind that the battery has to
be inserted correctly. Meaning the plus has to go to plus and minus to
minus. (If however the battery is inserted incorrectly, the device will not
be damaged by that.)
We recommend using alkaline batteries or rechargeable batteries.
Connecting the cables
Connect the electrode cable for the bracelet electrodes in the right socket (above
LED). Then connect the bracelets.
If you want to work with grounding: Connect the grounding cable to the left
socket, then to the outlet.
Diamond Shield IE Professional
Instruction Manual
page 48