Unpacking; Packaging; Package Contents; Checking The Device For Shipping Damage - NARDA SignalShark 3320 Schnelleinstieg

3

Unpacking

3.1

Packaging

The packaging is designed to be re-used if it has not been damaged during
previous shipping. Please keep the original packaging and use it again
whenever the device is shipped.
3.2

Package contents

The package contents are listed on the delivery note. Please check that you
have received all the items listed. Contact your supplier if anything is
missing.
3.3

Checking the device for shipping damage

After unpacking, check the device and all accessories for any damage that
may have occurred during shipping. Damage may have occurred if the
packaging itself has been clearly damaged. Do not attempt to use a device
that has been damaged.
3.4

Recovery after shipping and storage

Condensation can form on a device that has been stored or shipped at a low
temperature when it is brought into a warmer environment. To prevent
damage, wait until all condensation on the surface of the device has evapo-
rated. The device is not ready for use until it has reached a temperature that
is within the guaranteed operating range. For temperature ranges see the
corresponding datasheet
(https://www.narda-sts.com/en/signalshark-remote-unit/).
24 SignalShark 3320 Remote Unit Narda