Resetting The Appliance; Care And Cleaning - Klarstein Excelsa Handbuch

RESETTING THE APPLIANCE

This appliance has an overheat protection device that will automatically stop heating if
operated without enough water or ambient temperatures are too high.

CARE AND CLEANING

1. Before cleaning turn off any switches and ensure the power cord is removed from
the electrical outlet and allow appliance to cool.
2. Empty remaining liquid by removing lid, basket and pump tube and pouring liquid
into drain.
3. Wipe the outside area with a damp cloth and dry with a lint free cloth.
4. Never place appliance in water or other liquids
5. Never use abrasive cleaners or scouring pads. DO NOT use Baking Soda because
it can pit the metal and discolor permanently.
6. Allow to dry before storage.
7. In some places the water has a higher mineral content, which can discolour the
inside of the base. To remove these stains, fill the appliance with cold water and
add several tablespoons of vinegar. Let the appliance brew once, then turn it off
and unplug it from the wall outlet. Drain the solution and rinse the appliance with
clear water.
Reset button
(on the underside of the unit)
1. Unplug the appliance from the wall
outlet and allow the appliance to
cool down.
2. Gently press the button to reset the
unit.
EN
13