Disposal; Returns; Information - Gemü 840 Original Einbau- Und Montageanleitung

15

Disposal

All fl owmeter parts must be disposed of according to relevant local or
G
national disposal regulations / environmental protection laws.
Pay attention to adhered residual material and gas diff usion from penetrated
G
media.
Parts
Metering tube, union nuts, inserts, fl oat stops
Float with lead: 840, 845
Float with lead and magnet: 841, 846
O-rings
16

Returns

Clean the fl owmeter.
G
Request a goods return declaration form from GEMÜ.
G
Returns must be made with a completed declaration of return.
G
If not completed, GEMÜ cannot process
credits or

repair work,

but will dispose of the goods at the operator's expense.
Note for returns:
Legal regulations for the protection of the environment and personnel require that
the completed and signed goods return declaration is included with the dispatch
documents. Returned goods can be processed only when this declaration is
completed.
17

Information

Note on staff training:
Please contact us at the address on the last page for staff training information.
Should there be any doubts or misunderstandings in the preceding text, the German version
of this document is the authoritative document!
840
Disposal
in accordance with material identifi cation
in accordance with environmental
protection laws
as domestic waste type commercial waste
30 / 32