Technical Data - Bosch LSN Base FAA-500 Installationsanleitung

en | Product Description
8
1.
2.
3.
4.
4

Technical Data

Current consumption -
Contact load
Wire gauge
Product ID
2016.06 | 5.0 | F.01U.000.615
Installation with a FAA‑500‑BB Ceiling Mount Back Box: Place the base in the ceiling
mount back box so that the triangular mark (7) on the outer rim of the back box matches
with the single guideway (8).
Installation with a FAA‑500‑SB‑H Surface Mount Back Box: Ensure the correct alignment
of the base.
Turn the base until the fastening screws are in the middle of the long slit (6).
Slightly turn each base until the bases align in one direction.
Tighten the four screws.
FAA‑500
-
0.3 mm
4.998.15.297
FAA‑500‑R
0.2 mA
1 A, 30 V DC
- 3.3 mm (22 AWG - 12 AWG)
2 2
4.998.15.299
LSN Base | LSN Base with Relay
Bosch Sicherheitssysteme GmbH