Connecting The Projector With The Computer Using A Usb Cable; Conditions Of Computers That Can Be Connected - Epson Easy MP Benutzerhandbuch

Connecting the Projector With the
Computer Using a USB Cable
The projector and a personal computer can be connected using the USB cable supplied with the
projector, so that the contents of the memory card inserted in the projector can be accessed from
the computer.
♦

Conditions of Computers That Can Be Connected

Computers running Windows 98/Me/2000*
*Macintosh computers are not supported.
To connect a computer to the projector using a USB cable in order to access the memory card in
the projector, the USB driver must be installed in the computer being used. The USB driver to be
installed depends on the operating system used, as described below:
•
When Windows 98 is used
While referring to "Connecting the Projector to the Computer and Installing the USB Driver"
(see page 47), install the USB driver contained in the "EasyMP Software" CD-ROM supplied
with the projector.
•
When Windows Me is used
Install either the standard USB driver provided with the operating system or the USB driver
contained in the "EasyMP Software" CD-ROM supplied with the projector. If the standard USB
driver provided with the operating system has already been installed, it is not necessary to install
a USB driver. Simply connect the projector to the computer.
•
When Windows 2000 is used
Install the standard USB driver provided with the operating system. The USB driver contained
in the "EasyMP Software" CD-ROM supplied with the projector cannot be used.
46

- Connecting the Projector With the Computer Using a USB Cable