Epson Easy MP Benutzerhandbuch Seite 33

4
When a confirmation message is displayed, click the [OK] button.
5
When the transmission is complete, a message asking whether or not to specify the
Autorun settings appears. To select the Autorun or repeat settings, click the [Yes]
button and proceed to the next step. If the Autorun and repeat settings are not be
specified, click the [No] button to finish.
6 Change the settings and click the [OK] button.
All scenario files stored on the memory card will be displayed in the scenario file list at
the left.
To automatically project a scenario when EasyMP is started, set up Autorun by selecting
the desired scenario from the scenario file list, then clicking the [>>] button. The
scenario for which Autorun has been set up will be displayed in the Autorun scenario file
list at the right.
To repeatedly project a scenario from the beginning, set up repeat projection by selecting
the desired scenario from the scenario file list, then putting a check mark beside
[Revive].
Memo
The Autorun settings can also be specified by selecting [Scenario Option], then
[Edit Autorun] before sending a scenario.
Creating Scenarios (EMP SlideMaker) -
31