Operating Easymp; Exiting From Easymp - Epson Easy MP Benutzerhandbuch

Point
•
If a memory card is not inserted, the message "There is no memory card." is displayed and
the EasyMP functions cannot be used.
•
If a scenario with an autorun setting is stored on a memory card, the projection of that
scenario will start once the power to the projector is turned on.
•
Even when the projector is displaying images from another image source (computer or video
equipment), once a memory card storing a scenario with an autorun setting is inserted, the
screen display of the projector automatically changes to the EasyMP screen and the scenario
on the memory card is projected.
•
You can select the display of the EasyMP screen from the following languages: English,
Japanese, French, German, Italian, Spanish, Portuguese, Chinese and Korean. Change the
display language by selecting [Advanced], then [Language] from the setup menu of the
projector's main unit. (Refer to "Menu Operation" in the Owner's Manual for the projector.)
♦

Operating EasyMP

With EasyMP running, this projector's remote control functions as the input device. The basic
operations of the input device are as follows:
•
Moving the pointer
When the [Enter] button of the remote control is tilted up, down, right or left, as with tracking
points, the cursor on the EasyMP screen moves in that direction.
•
Selecting and executing a function
When the cursor is positioned on an icon on the screen and the [Enter] button of the remote
control is pressed, the function assigned to the selected icon will be executed.
♦

Exiting from EasyMP

There is no concept of exiting from EasyMP. To switch to another image source such as a video,
just press the appropriate input-source button on the remote control. This can even be done while
running EasyMP. To end the projection, press the [Power] button on the remote control or on the
projector's operation panel twice, even while EasyMP is being used. The power to the projector
will then be turned off.
Starting the EasyMP Software -
17