Epson Easy MP Benutzerhandbuch Seite 24

3
Specify the desired scenario settings while referring to the table below, and then click
the [OK] button.
Scenario Name
Scenario Folder
Background Color
Image Quality
Memo
Any setting can be changed by selecting the [File] menu, then [Property].
22
- Creating Scenarios (EMP SlideMaker)
The scenario name is used as the file name of the scenario to
be created, as well as the name of the scenario folder. A
scenario name must be entered, and it must be within 127
characters, including the directory of the scenario folder
described below. Uppercase letters and numbers can be
entered.
Specify where to create the scenario folder that will be used
while creating the scenario. A scenario folder will be created
in the directory specified here.
Select the background color of the image data in the scenario.
EMP SlideMaker converts each page of a PowerPoint file into
an image file, then stores it. Under "Image Quality", select the
image quality to be used during conversion into image files. If
[Non-compress] is selected, the image in each cell is
stored as an image file in BMP format. Images in BMP format
can be projected at high quality, but the file size will be large
since they are not compressed. Also, it takes more time to
project them as compared with the [Standard] image
quality. Of all the settings, the [Non-compress] image
quality achieves image projection at the highest quality. When
either [Standard] or [High Quality] is selected, the image
in each cell will be stored as an image file in JPEG format. A
JPEG file with a higher compression ratio will have a poorer
image quality. However, the file size is smaller as compared
with images in the BMP format. Compared with the
[Standard] setting, image quality will be higher if [High
Quality] is selected because of the lower compression ratio.
If a JPEG file is directly incorporated into a scenario, any of
the above image quality settings will become invalid for that
image, and the compression ratio of the original file will be
used.