Intended Use; Technical Description - Dometic DSP 1212C Montage- Und Bedienungsanleitung

SinePower
6

Intended use

!
WARNING!
Never use the device on vehicles where the positive terminal of the
battery is connected to the chassis.
The devices with integrated battery charger convert direct current into a 230 – 240 V
AC supply of 50 Hz or 60 Hz:
• 12 Vg: DSP1212C, DSP2012C
• 24 Vg: DSP1224C, DSP2024C
Additionally the devices can charge the following batteries:
• Lead automotive batteries
• Lead gel batteries
• Maintenance-free batteries
• Absorbed glass mat (AGM) batteries
• Lithium ion batteries
Never use the devices to charge other battery types (such as NiCd or NiMH).
!
WARNING! Danger of explosions
Do not charge batteries with a cell short circuit. The oxyhydrogen they
produce can cause explosions.
Do not charge nickel cadmium and non-rechargeable batteries with the
charger. The cases of these batteries can burst explosively.
7

Technical description

The devices can be operated wherever a DC connection is available:
• 12 Vg: DSP1212C, DSP2012C
• 24 Vg: DSP1224C, DSP2024C
The device can be used as follows:
• As a sine wave inverter: the device produces a pure 230 V output voltage
• As a battery charger (4-stage charging characteristic)
• Power sharing: the device powers a connected load with 230 V and
simultaneously charges a battery
• Generator function (mains voltage function): the device supports a 230 V mains
voltage by supplementing it with energy from a battery (common power source)
EN
Intended use
9