Operating Determinations; Description - EuroLite IR2DMX Bedienungsanleitung

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it
on immediately. The arising condensation water might damage your device. Leave the device switched off
until it has reached room temperature.
This device falls under protection-class III. The device must be operated with an appropriate power unit.
Always disconnect from the mains, when the device is not in use or before cleaning it.
Please note that damages caused by manual modifications on the device or unauthorized operation by
unqualified persons are not subject to warranty.
Keep away children and amateurs from the device!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.

3. OPERATING DETERMINATIONS

This device is a infrared receiver for controlling DMX-effects or spots in discotheques, on stages etc. This
product is allowed to be operated with a direct voltage of DC 12 V, 300 mA and was designed for indoor use
only.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.

4. DESCRIPTION

The easy way...
The EUROLITE DMX LED Operator IR2DMX is a DMX controller especially designed for the EUROLITE
LED-spots and LED-effects with 5 DMX-channels plus KLS-series and LED BAR RGB.
This controller features pre-programmed presets and colors, which can easily be displayed by pressing one
button. Save your precious time for programming the individual DMX-channels in order to display this color
or that color.
Virtual LED DMX controller
• Infrared receiver with DMX output socket
• For EUROLITE IR remote for LED effects
• Inexpensive solution for programming LED effects with 5-channel standard DMX protocol and KLS-series
via an infrared remote control
• 47 control channels only suitable for matching LED effects
• 4 LED parcans, one KLS lightset and one LED BAR can be controlled at the same time
• Functions: static colors, automatic color change, internal programs, strobe effect, Master/Slave
• Control in stand-alone mode and DMX programming via optional IR remote (necessary for use)
• Sound-control via built-in microphone
• Adjustable microphone sensitivity via remote control or that colour.
11/15 00058530.DOC, Version 1.2