Running Belt Adjustment; Daily Maintenance - Capital Sports Pacemaker F80 Anschluss- Und Anwendungshinweise

1. Running belt deviates to left - Start the machine, set speed at 2-3 km/h without a load on the belt,
use Allen key to turn the screw 1/4 turn (see fig1). Then allow the machine to run without a load for
1-2 minutes. Repeat process until the belt becomes central.
2. Running belt deviate to right - Start the machine, set speed at 2-3 km/h without a load on the belt,
use Allen key to turn the screw 1/4 turn (see fig2). Then allow the machine to run without a load for
1-2 minutes. Repeat process until the belt becomes central.
3. Running belt jam - If the running belt is in dead condition, use the Allen key to turn the screw 1/2 a
turn both left and right until the jam is resolved (see fig3).
1. Please disconnect power before checking the machine or cleaning.
2. Clear belt and dial plate after use, at least once a week.
3. Check and tighten screws and spines at fixing point.
4. Do not hang clothes or other objects on the machine.
20

Running Belt Adjustment

Daily Maintenance