Appliance Activation - GENTILIN C 330/04 Bedienungs-Anleitungen

DanGER oF BURnS UPon aCCiDEntal ContaCt WitH tHE tWin CYlinDER PUMP SYStEM anD ElECtRiC
MotoR. WaRninG – RESiDUal RiSK (SEE PaRaGRaPH "RESiDUal RiSKS").
tHE ManUFaCtURtER DEClinES anY RESPonSiBilitY FoR DaMaGE to PERSonS, aniMalS oR oBJECtS CaU-
SED BY inoBSERVanCE oF REGUlationS anD tHEWaRninGS DESCRiBED in tHE PRESEnt ManUal.
tHE ManUFaCtURtER DEClinES anY RESPonSiBilitY FoR tHE oUtCoME FolloWinG USaGE aS tHiS iS DE-
PEnDEnt on tHE UtEnSil USED anD tHE PRoFESSional SKillS oF tHE aUtHoRiSED oPERatoRS.
tHE aUtHoRiSED oPERatoRS MaY onlY StaRt UP tHE aPPlianCE onlY aFtER HaVinG CaRRiED oUt tHE
CoMPlUlSaRY CHECKS DESCRiBED.
BEFoRE USinG tHE aPPlianCE in QUEStion, aUtHoRiSED oPERatoRS MUSt REaD anD UnDERStanD all
PaRtS oF tHE PRESEnt ManUal.
DURinG oPERation, PlEaSE EnSURE tHat UnaUtHoRiSED PERSonS Do not CoME WitHin PRoXiMitY oF
tHE aPPlianCE.
aUtHoRiSED oPERatoRS MUSt not lEaVE tHE aPPlianCE UnSUPERViSED WHilSt in oPERation oR DURinG
MaintEnnaCE intERVEntionS.
1) Connect the appliance to the power supply (1) by plugging it in.
2) Switch on the appliance using the "ON-OFF" switch (3) ensuring it is in the "ON (I)" position (the appliance is operational
until it reaches a maximum operating pressure of 10 bar, after which, it switches off automatically.
3) Regulate the outlet pressure using the relevant regulator (4) according to the utensil used and type of work. Control
the pressure displayed by the relevant gauge (6).
Do not FUllY SCREW tHE oUlEt PRESSURE GaUGE (4) oR YoU RiSK DaMaGinG tHE MEMEBRanE.
4) Connect the utensil to the air pipe (extension).
5) Connect the air pipe (extension) to the air outlet spigot (5).
aiR PiPES (EXtEnSionS), ConnECtionS anD UtEnSilS WHiCH ConFoRM to DEtailS aS SPECiFiED in
tHE inStRUCtion ManUalS PRoViDED BY tHE RElEVant ManUFaCtURERS MUSt BE USED.
it iS StRiCtlY FoRBiDDEn to USE UnSUitaBlE aiR HoSES (EXtEnSionS), FittinGS anD toolS tHat Do not
CoMPlY WitH CURREnt REGUlationS.
6) Carry out operations (the appliance will re-start automatically in the instance where the operating pressure falls below
7 bar).
7) Upon termination of operations, switch off the appliance as described in Paragraph "APPLIANCE DEACTIVATION".
1
Rev. 00 - 06/2014 - Instruction manual Compressor C 330/04 - C330/10 - C330/10+10 - C330/100

APPLIANCE ACTIVATION

5
4
6
2
3
7
21