La Cimbali S39 Dolcevita 2 Gebrauch Und Installation Seite 53

4) Fill a container with one dose of liquid detergent (see
product instructions).
5) To perform the wash cycle keep the milk wash key (28)
pressed on the selection keypad.
After pressing the key (28), the type of wash cycle mode
can be selected:
- Simultaneous washing of both groups (preset mode)
When the arrows are positioned as shown in Figure
A, press the OK key or the PRG (29) key to start the
washing cycle.
The message "MILK WASHING" appears on the display.
-
versa)
Use the "+" (30) or "-" (31) keys to move the arrows on
Group 1(Figure B) or on Group 2 (Figure C), and then
press OK or the PRG (29) key to start washing the
selected group.
The message "MILK WASHING" appears on the display.
NOTE: If the block function is not set, during the separate
washing cycle you can still dispense beverages
with the group that is not being washed.
6) The washing cycle ends when the "WASH MILK" message
is NO LONGER on the display.
7) Remove the milk intake tube from the container and
replace it inside the milk container.
02_S39DV2.indd 17
4
50
ml
5
15
Wednesday
A
to change sel.
GR1 WASHING
to change sel.
B
to change sel.
or
15 April 2009
Wednesday 10:19:41
MILK WASHING
6
15 April 2009
Wednesday 10:19:41
MILK WASHING
7
1
MILK
17 EN
50
ml
April 2009
10:19:41
EXECUTE WASHING
MILK CIRCUIT
15 April 2009
or
Wednesday 10:19:41
MILK WASHING
GR2 WASHING
to change sel.
C
to change sel.
or
15 April 2009
Wednesday 10:19:41
MILK WASHING
15 April 2009
Wednesday 10:19:41
2
MILK
18/06/2014 15:15:31