General Indications - La Cimbali S39 Dolcevita 2 Gebrauch Und Installation

12.1 Dispensing of beverages - Cappuccino / milk (Cappuccino-Maker version)

GENERAL INDICATIONS

Milk is a delicate biological product and can easily
at a storage temperature no higher than 5°C (41°F) from
the moment the container is opened and throughout its
entire period of use. Our storage appliances are suitable
for this purpose.
NOTE: at the end of the work day (or not more than 24
hours from the time the container is opened), any
remaining milk must be discarded.
Preliminary operations
Insert the tube (40) into the milk container.
Place the cup (or cups) under the dispenser (1).
If necessary, adjust the dispenser height.
Cappuccino dispenser
Press the cappuccino dispensing button corresponding
to the required dose. The led in the selected button will
come on and dispensing will begin. Dispensing will stop
automatically.
Dispensing can also be interrupted by pressing the "OK"
key.
If the milk and coffee are poured into the cup simultaneously,
the "OK" key needs to be pressed once only to stop
dispensing.
If the milk and coffee are not poured into the cup
simultaneously, when the "OK" key is pressed the liquid
currently being dispensed will stop. When the "OK" key is
pressed a second time the next dispensing phase will be
stopped.
Delivery of cappuccino with powdered coffee for ma-
chines without automatic doser
Open the decaffeinated coffee panel (18) and measure
out a dose of powdered coffee into the tube and close the
powdered coffee panel (18). The leds relative to the keys
programmed for one cup located on the display panel (3)
will blink. Also, keys in second selection and special key
will blink alternatively if programmed.
Press one of the keys associated to the ignited leds that
corresponds to the desired dose.
Delivery terminates automatically.
CAUTION: do not put any cloth on the cup-
tray.
The machines have a cup tray (9) which can be used to
store the cups.
Only place cups and glasses used with the coffee machine
on the cup tray (9). No other objects must be placed on
the tray (9).
Thoroughly drain the cups before placing them on the
tray (9).
02_S39DV2.indd 13
3
40
Milk dispenser
Press the milk dispensing button corresponding to the
required dose. The led in the selected button will come
on and dispensing will begin. Dispensing will stop
automatically.
Dispensing may be interrupted by pressing the "OK" key.
OPTIONS
The options indicated in section "3. Coffee dispensing"
are available.
The technician who installs the machine can also be asked
to personalize the cappuccino buttons in the following ways:
- milk dispensing before the coffee or vice versa (only when
cappuccino is dispensed);
Proceed as explained in section "CUSTOMER
PROGRAMMING" to obtain hot or tepid milk.
12.2 Cup tray
13 EN
18
OK
3
1
9
18/06/2014 15:15:28