Certifi Cation; Description Of The Electric Water Heaters - Atlantic CORTHERM 500 Installation, Betrieb Und Wartung

1. CERTIFICATION
- Energy labelling (2010/30/EC): from 26/09/2015
In application of the directive and according to the requirements of EU regulation
no. 812/2013 of 18 February 2013, information on water heaters with a power rating less
than or equal to 70 kW is available in appendix B (see page 81).
- Eco-design (2009/125/EC): from 26/09/2015
In application of the directive and according to the requirements of EU regulation
no. 814/2013 of 2 August 2013, the technical parameters of water heaters with a power
rating less than or equal to 400 kW are available in appendix B (see page 81).
For the purposes of transparency, data on the rest of the range is available in appendix C
(see page 85).

2. DESCRIPTION OF THE ELECTRIC WATER HEATERS

!
WARNING: HEAVY APPLIANCE. HANDLE WITH CARE.
The tank is protected by an internal SECUREMAIL anti-corrosion coating.
The water heater's thermal insulation consists of:
- for the M0 version, a rigid grey sheet-metal casing over 100 mm of glass wool,
- for the M1 version, a fl exible insulating casing consisting of 100 mm of glass wool covered
with a fl exible PVC envelope (non-fl ammable),
- for the TOP NC version (not classifi ed), a fl exible insulating casing consisting of 100 mm
of foam covered with a fl exible PVC envelope.
An optional manhole with Ø 400 mm allows the interior condition of the tank to be inspected.
DHW temperature: 65°C ±5°C (factory setting).
Maximum water temperature in use: 95°C
Service pressure: 8 or 10 bar
A data plate listing all the information about the tank is located on the foot of the tank in line
with the thermometer and on the casing. Please take note of these details before contacting
After-Sales Service.
01.02.2017
EN
Page 17 / 90