Herunterladen Inhalt Inhalt Diese Seite drucken

Air Filter - Daikin R410A SPLIT SERIES Installationsanleitung

Vorschau ausblenden Andere Handbücher für R410A SPLIT SERIES:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 40
1.
Open the front panel.
Hold the panel at the recesses on the main unit
(2 recesses on right and left sides) and lift it until it
stops.
2.
Pull out the air filters.
Push a little upwards the tab at the center of each air
filter, then pull it down.
Hold the recessed parts of the frame and unhook the
four claws.
3.
Clean or replace each filter.
When shaking off remaining water, do not wring the
filter.
Filter frame
Tab

AIR FILTER

Recess on
main unit
Air filter
Titanium apatite
deodorizing filter
1-16
4.
Set the air filter as they were and close the front
panel.
Insert claws of the filters into slots of the front panel.
Close the front panel slowly and push the panel at the
3 points. (1 on each side and 1 in the middle.)
The air filter have a symmetrical form in the horizontal
direction.
FRONT

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis