Installing The Unit; Connecting The Air Discharge Hose; Technical Data - Trotec Pac 2000 S Bedienungsanleitung

Installing the Unit

• Install the unit next to a door, a window or French
doors .
• Make sure that there is a minimum distance of
60cm between the air outlet at the back of the unit
and any walls, cupboards or any other furniture or
objects.
• Connect the air discharge hose to the air outlet at
the back of the unit .
• Extend the hose to its entire length to see if it is
long enough to pass through a door or window or a
hole which might have been made to accommoda-
te the hose .
• Make sure that the air outlet is not blocked and free
of any obstructions .
Connecting the Air Discharge Hose and the Adapter
Connect the air discharge hose to the air outlet
1. Hold both ends of the air discharge hose and ex-
tend the hose to its full length .
2 . Screw the air discharge hose onto the connecting
piece .
3 . Connect the window adapter to the air discharge hose .
en operating manual – pac 2000 s moBile air conditioning unit
4 . Connect the air discharge hose with the connected
connecting piece to the air outlet .

06. Technical Data

Model
Cooling performance
(Btu/h)/(W)
Dehumidification capacity
(l/h)
Power input
Mains voltage/Amperage
Air flow volume (m³/h)
Rated voltage/Frequency
(V/Hz)
Sound level pressure (dB (A)) ≤ 52 dB (A)
Net weight (kg)
Dimensions Housing (mm)
T x B x H
Packaging (mm)
Refrigerant
Room size (m²)
Miniature fuse
In the European Union electronic equipment
must not be treated as domestic waste, but
must be disposed of professionally in ac-
cordance with Directive 2002/96EU of the
European Parliament and Council of 27th January 2003
concerning old electrical and electronic equipment . At
the end of its life please dispose of this instrument in a
manner appropriate to the relevant legal requirements .
PAC 2000 S
7000 Btu/h/2000 W
1,0 l/h
750 W / 3,3 A
320 m³/h
AC220-240 V / 50 Hz
23 kg
305 x 420 x 636 mm
360 x 480 x 820 mm
R410a
~30 m²
3,15 A 250 V
B - 9